Accessory of programming
If you need to create a circuit of small size with a microcontroller to be programmed, the programming connector size will be a handicap. The install
The device (for the ATMEL microcontrollers programming but adaptable to other manufacturers) has three parts.
_ A fixed part plastic (3D manufacturing), supporting two cylindrical aluminum 6 mm diameter, makeshift slides to force.
_Also sliding contacts spring support for positioning under the circuit board.
_ A mobile part now the circuit board with blocking by screws.
The PCB should have a mark corresponding to a HE6 connector with pin 1 upper-left footprint being perpendicular to the Rails. The edges of the circuit must be free of components on 1.5 mm to be able to move through the slides of the device.
Dimensions of printed circuits, mini 15mm maxi 100mm (Europ cards).
_ A fixed part plastic (3D manufacturing), supporting two cylindrical aluminum 6 mm diameter, makeshift slides to force.
_Also sliding contacts spring support for positioning under the circuit board.
_ A mobile part now the circuit board with blocking by screws.
The PCB should have a mark corresponding to a HE6 connector with pin 1 upper-left footprint being perpendicular to the Rails. The edges of the circuit must be free of components on 1.5 mm to be able to move through the slides of the device.
Dimensions of printed circuits, mini 15mm maxi 100mm (Europ cards).
Build This Project
Bring this design to life with the Elektor PCB Service, powered by Eurocircuits. Upload the project files and order professionally manufactured PCBs or assembled boards through a proven European production platform.
Supporting KiCad, Eagle, Gerber, and ODB++ formats, the service is suitable for everything from prototypes and validation builds to series production and volume manufacturing.
Made in Europe. Fast. Reliable. Professional.
Commenti (0 commenti)